Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 4.99.13 (CAPO64) #3: Tue Mar 6 08:43:08 EST 2007 gary@capo:/usr/obj/sys/arch/amd64/compile.amd64/CAPO64 total memory = 2047 MB avail memory = 1967 MB timecounter: Timecounters tick every 10.000 msec timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 mainbus0 (root) cpu0 at mainbus0 apid 0: (boot processor) cpu0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+, 2000.13 MHz cpu0: features: f7dbfbff cpu0: features: f7dbfbff cpu0: features: f7dbfbff cpu0: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way cpu0: L2 cache 512 KB 64B/line 16-way cpu0: ITLB 32 4 KB entries fully associative, 8 4 MB entries fully associative cpu0: DTLB 32 4 KB entries fully associative, 8 4 MB entries fully associative cpu0: AMD Power Management features: f cpu0: AMD Cool`n'Quiet Technology 2000 MHz cpu0: available frequencies (Mhz): 1000 1800 2000 cpu0: calibrating local timer cpu0: apic clock running at 200 MHz cpu0: 8 page colors cpu1 at mainbus0 apid 1: (application processor) cpu1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+, 2000.07 MHz cpu1: features: f7dbfbff cpu1: features: f7dbfbff cpu1: features: f7dbfbff cpu1: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way cpu1: L2 cache 512 KB 64B/line 16-way cpu1: ITLB 32 4 KB entries fully associative, 8 4 MB entries fully associative cpu1: DTLB 32 4 KB entries fully associative, 8 4 MB entries fully associative cpu1: AMD Power Management features: f cpu0: AMD Cool`n'Quiet Technology 2000 MHz cpu0: available frequencies (Mhz): 1000 1800 2000 ioapic0 at mainbus0 apid 2 ioapic0: pa 0xfec00000, version 11, 24 pins ioapic1 at mainbus0 apid 3 ioapic1: pa 0xfec10000, version 11, 16 pins acpi0 at mainbus0: Advanced Configuration and Power Interface acpi0: using Intel ACPI CA subsystem version 20060217 acpi0: X/RSDT: OemId , AslId acpi0: SCI interrupting at int 9 acpi0: fixed-feature power button present timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000 ACPI-Fast 32-bit timer ACPI Object Type 'Processor' (0x0c) at acpi0 not configured ACPI Object Type 'Processor' (0x0c) at acpi0 not configured PNP0A03 [PCI/PCI-X Host Bridge] at acpi0 not configured PNP0000 [AT Interrupt Controller] at acpi0 not configured PNP0200 [AT DMA Controller] at acpi0 not configured attimer0 at acpi0 (PNP0100): AT Timer attimer0: io 0x40-0x43 irq 0 PNP0B00 [AT Real-Time Clock] at acpi0 not configured pcppi0 at acpi0 (PNP0800) pcppi0: io 0x61 midi0 at pcppi0: PC speaker (CPU-intensive output) sysbeep0 at pcppi0 PNP0C04 [Math Coprocessor] at acpi0 not configured fdc1 at acpi0 (PNP0700) fdc1: io 0x3f0-0x3f5,0x3f7 irq 6 drq 2 fdc1: expected BUFFER, got 4 PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured pckbc0 at acpi0 (PNP0303): kbd port pckbc0: io 0x60,0x64 irq 1 pckbc1 at acpi0 (PNP0F03): aux port pckbc1: irq 12 PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured PNP0C01 [System Board] at acpi0 not configured acpibut0 at acpi0 (PNP0C0C-170): ACPI Power Button PNP0C0F [PCI interrupt link device] at acpi0 not configured PNP0C0F [PCI interrupt link device] at acpi0 not configured PNP0C0F [PCI interrupt link device] at acpi0 not configured PNP0C0F [PCI interrupt link device] at acpi0 not configured PNP0C0F [PCI interrupt link device] at acpi0 not configured PNP0C0F [PCI interrupt link device] at acpi0 not configured PNP0C0F [PCI interrupt link device] at acpi0 not configured PNP0C0F [PCI interrupt link device] at acpi0 not configured PNP0C0F [PCI interrupt link device] at acpi0 not configured pcppi0: attached to attimer0 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok pchb0 at pci0 dev 0 function 0 pchb0: Acer Labs product 0x1695 (rev. 0x00) ppb0 at pci0 dev 1 function 0: Acer Labs product 0x524b (rev. 0x00) pci1 at ppb0 bus 1 pci1: memory space enabled, rd/line, wr/inv ok ppb1 at pci0 dev 2 function 0: Acer Labs product 0x524c (rev. 0x00) pci2 at ppb1 bus 2 pci2: memory space enabled, rd/line, wr/inv ok ppb2 at pci0 dev 3 function 0: Acer Labs product 0x524d (rev. 0x00) pci3 at ppb2 bus 3 pci3: i/o space, memory space enabled, rd/line, wr/inv ok unknown vendor 0x197b product 0x2360 (SATA mass storage, interface 0x01, revision 0x02) at pci3 dev 0 function 0 not configured pchb1 at pci0 dev 4 function 0 pchb1: Acer Labs product 0x1689 (rev. 0x00) agp at pchb1 not configured ppb3 at pci0 dev 5 function 0: Acer Labs product 0x5246 (rev. 0x00) pci4 at ppb3 bus 4 pci4: i/o space, memory space enabled vga0 at pci4 dev 0 function 0: ATI Technologies Radeon 7000/VE QY (rev. 0x00) wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0 wsmux1: connecting to wsdisplay0 ppb4 at pci0 dev 6 function 0: Acer Labs M5249 Hypertransport to PCI bridge (rev. 0x00) pci5 at ppb4 bus 5 pci5: i/o space, memory space enabled rtk0 at pci5 dev 5 function 0: D-Link Systems DFE 530TX+ (rev. 0x10) rtk0: interrupting at ioapic0 pin 20 (irq 11) rtk0: Ethernet address 00:50:ba:60:0e:19 rlphy0 at rtk0 phy 7: Realtek internal PHY rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto skc0 at pci5 dev 6 function 0: ioapic0 pin 21 (irq 4) skc0: interrupt moderation is 0 us skc0: DGE-530T Gigabit Ethernet Adapter rev. (0x9) sk0 at skc0 port A: Ethernet address 00:15:e9:bd:0c:1e makphy0 at sk0 phy 0: Marvell 88E1011 Gigabit PHY, rev. 5 makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto pcib0 at pci0 dev 7 function 0 pcib0: Acer Labs M1563 PCI-ISA Bridge (rev. 0x70) Acer Labs M7101 Power Management Controller (miscellaneous bridge) at pci0 dev 7 function 1 not configured auacer0 at pci0 dev 8 function 0: Acer Labs M5455 Audio controller auacer0: interrupting at ioapic0 pin 18 (irq 7) auacer0: ac97: Avance Logic ALC850 codec; no 3D stereo auacer0: ac97: ext id 9c6 audio0 at auacer0: full duplex, independent Acer Labs product 0x5263 (ethernet network, revision 0x40) at pci0 dev 17 function 0 not configured aceride0 at pci0 dev 18 function 0 aceride0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc7) aceride0: bus-master DMA support present aceride0: primary channel configured to compatibility mode aceride0: primary channel interrupting at ioapic0 pin 14 (irq 14) atabus0 at aceride0 channel 0 aceride0: secondary channel configured to compatibility mode aceride0: secondary channel interrupting at ioapic0 pin 15 (irq 15) atabus1 at aceride0 channel 1 pciide0 at pci0 dev 18 function 1 pciide0: Acer Labs product 0x5289 (rev. 0x10) pciide0: bus-master DMA support present, but unused (no driver support) pciide0: primary channel configured to native-PCI mode pciide0: using ioapic0 pin 19 (irq 5) for native-PCI interrupt atabus2 at pciide0 channel 0 pciide0: secondary channel configured to native-PCI mode atabus3 at pciide0 channel 1 ohci0 at pci0 dev 19 function 0: Acer Labs M5237 USB 1.1 Host Controller (rev. 0x03) ohci0: interrupting at ioapic0 pin 20 (irq 11) ohci0: OHCI version 1.0, legacy support usb0 at ohci0: USB revision 1.0 uhub0 at usb0 uhub0: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered ohci1 at pci0 dev 19 function 1: Acer Labs M5237 USB 1.1 Host Controller (rev. 0x03) ohci1: interrupting at ioapic0 pin 21 (irq 4) ohci1: OHCI version 1.0, legacy support usb1 at ohci1: USB revision 1.0 uhub1 at usb1 uhub1: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 3 ports with 3 removable, self powered ohci2 at pci0 dev 19 function 2: Acer Labs M5237 USB 1.1 Host Controller (rev. 0x03) ohci2: interrupting at ioapic0 pin 22 (irq 11) ohci2: OHCI version 1.0, legacy support usb2 at ohci2: USB revision 1.0 uhub2 at usb2 uhub2: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 3 ports with 3 removable, self powered ehci0 at pci0 dev 19 function 3: Acer Labs M5239 USB 2.0 Host Controller (rev. 0x01) ehci0: interrupting at ioapic0 pin 23 (irq 5) ehci0: BIOS has given up ownership ehci0: EHCI version 1.0 ehci0: companion controllers, 3 ports each: ohci0 ohci1 ohci2 usb3 at ehci0: USB revision 2.0 uhub3 at usb3 uhub3: Acer Labs EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub3: 8 ports with 8 removable, self powered pchb2 at pci0 dev 24 function 0 pchb2: Advanced Micro Devices AMD64 HyperTransport configuration (rev. 0x00) pchb3 at pci0 dev 24 function 1 pchb3: Advanced Micro Devices AMD64 Address Map configuration (rev. 0x00) pchb4 at pci0 dev 24 function 2 pchb4: Advanced Micro Devices AMD64 DRAM configuration (rev. 0x00) pchb5 at pci0 dev 24 function 3 pchb5: Advanced Micro Devices AMD64 Miscellaneous configuration (rev. 0x00) isa0 at pcib0 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 fd0 at fdc1 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec wd0 at atabus0 drive 0: wd0: drive supports 32-sector PIO transfers, LBA addressing wd0: 19536 MB, 39693 cyl, 16 head, 63 sec, 512 bytes/sect x 40011300 sectors wd0: 32-bit data port wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66) wd1 at atabus0 drive 1: wd1: drive supports 16-sector PIO transfers, LBA addressing wd1: 76345 MB, 155114 cyl, 16 head, 63 sec, 512 bytes/sect x 156355584 sectors wd1: 32-bit data port wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) wd0(aceride0:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA) wd1(aceride0:0:1): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA) atapibus0 at atabus1: 2 targets cd0 at atapibus0 drive 0: cdrom removable cd0: 32-bit data port cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33) cd0(aceride0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA) uhub3: device problem, disabling port 3 boot device: wd1 root on wd1a dumps on wd0b ulpt0 at uhub1 port 2 configuration 1 interface 0 ulpt0: HewLett Packard HP LaserJet 1200, rev 1.10/1.00, addr 2, iclass 7/1 ulpt0: using bi-directional mode skc0: interrupt moderation is 1000 us wsdisplay0: screen 1 added (80x25, vt100 emulation) wsdisplay0: screen 2 added (80x25, vt100 emulation) wsdisplay0: screen 3 added (80x25, vt100 emulation) wsdisplay0: screen 4 added (80x25, vt100 emulation) wsdisplay0: screen 5 added (80x25, vt100 emulation) wsdisplay0: screen 6 added (80x25, vt100 emulation) wsdisplay0: screen 7 added (80x25, vt100 emulation) syncing disks... 5 done unmounting file systems...Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 4.99.13 (CAPO64) #3: Tue Mar 6 08:43:08 EST 2007 gary@capo:/usr/obj/sys/arch/amd64/compile.amd64/CAPO64 total memory = 2047 MB avail memory = 1967 MB timecounter: Timecounters tick every 10.000 msec timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 mainbus0 (root) cpu0 at mainbus0 apid 0: (boot processor) cpu0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+, 2000.13 MHz cpu0: features: f7dbfbff cpu0: features: f7dbfbff cpu0: features: f7dbfbff cpu0: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way cpu0: L2 cache 512 KB 64B/line 16-way cpu0: ITLB 32 4 KB entries fully associative, 8 4 MB entries fully associative cpu0: DTLB 32 4 KB entries fully associative, 8 4 MB entries fully associative cpu0: AMD Power Management features: f cpu0: AMD Cool`n'Quiet Technology 2000 MHz cpu0: available frequencies (Mhz): 1000 1800 2000 cpu0: calibrating local timer cpu0: apic clock running at 200 MHz cpu0: 8 page colors cpu1 at mainbus0 apid 1: (application processor) cpu1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+, 2000.07 MHz cpu1: features: f7dbfbff cpu1: features: f7dbfbff cpu1: features: f7dbfbff cpu1: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way cpu1: L2 cache 512 KB 64B/line 16-way cpu1: ITLB 32 4 KB entries fully associative, 8 4 MB entries fully associative cpu1: DTLB 32 4 KB entries fully associative, 8 4 MB entries fully associative cpu1: AMD Power Management features: f cpu0: AMD Cool`n'Quiet Technology 2000 MHz cpu0: available frequencies (Mhz): 1000 1800 2000 ioapic0 at mainbus0 apid 2 ioapic0: pa 0xfec00000, version 11, 24 pins ioapic1 at mainbus0 apid 3 ioapic1: pa 0xfec10000, version 11, 16 pins acpi0 at mainbus0: Advanced Configuration and Power Interface acpi0: using Intel ACPI CA subsystem version 20060217 acpi0: X/RSDT: OemId , AslId acpi0: SCI interrupting at int 9 acpi0: fixed-feature power button present timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000 ACPI-Fast 32-bit timer ACPI Object Type 'Processor' (0x0c) at acpi0 not configured ACPI Object Type 'Processor' (0x0c) at acpi0 not configured PNP0A03 [PCI/PCI-X Host Bridge] at acpi0 not configured PNP0000 [AT Interrupt Controller] at acpi0 not configured PNP0200 [AT DMA Controller] at acpi0 not configured attimer0 at acpi0 (PNP0100): AT Timer attimer0: io 0x40-0x43 irq 0 PNP0B00 [AT Real-Time Clock] at acpi0 not configured pcppi0 at acpi0 (PNP0800) pcppi0: io 0x61 midi0 at pcppi0: PC speaker (CPU-intensive output) sysbeep0 at pcppi0 PNP0C04 [Math Coprocessor] at acpi0 not configured fdc1 at acpi0 (PNP0700) fdc1: io 0x3f0-0x3f5,0x3f7 irq 6 drq 2 fdc1: expected BUFFER, got 4 PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured pckbc0 at acpi0 (PNP0303): kbd port pckbc0: io 0x60,0x64 irq 1 pckbc1 at acpi0 (PNP0F03): aux port pckbc1: irq 12 PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured PNP0C01 [System Board] at acpi0 not configured acpibut0 at acpi0 (PNP0C0C-170): ACPI Power Button PNP0C0F [PCI interrupt link device] at acpi0 not configured PNP0C0F [PCI interrupt link device] at acpi0 not configured PNP0C0F [PCI interrupt link device] at acpi0 not configured PNP0C0F [PCI interrupt link device] at acpi0 not configured PNP0C0F [PCI interrupt link device] at acpi0 not configured PNP0C0F [PCI interrupt link device] at acpi0 not configured PNP0C0F [PCI interrupt link device] at acpi0 not configured PNP0C0F [PCI interrupt link device] at acpi0 not configured PNP0C0F [PCI interrupt link device] at acpi0 not configured pcppi0: attached to attimer0 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok pchb0 at pci0 dev 0 function 0 pchb0: Acer Labs product 0x1695 (rev. 0x00) ppb0 at pci0 dev 1 function 0: Acer Labs product 0x524b (rev. 0x00) pci1 at ppb0 bus 1 pci1: memory space enabled, rd/line, wr/inv ok ppb1 at pci0 dev 2 function 0: Acer Labs product 0x524c (rev. 0x00) pci2 at ppb1 bus 2 pci2: memory space enabled, rd/line, wr/inv ok ppb2 at pci0 dev 3 function 0: Acer Labs product 0x524d (rev. 0x00) pci3 at ppb2 bus 3 pci3: i/o space, memory space enabled, rd/line, wr/inv ok unknown vendor 0x197b product 0x2360 (SATA mass storage, interface 0x01, revision 0x02) at pci3 dev 0 function 0 not configured pchb1 at pci0 dev 4 function 0 pchb1: Acer Labs product 0x1689 (rev. 0x00) agp at pchb1 not configured ppb3 at pci0 dev 5 function 0: Acer Labs product 0x5246 (rev. 0x00) pci4 at ppb3 bus 4 pci4: i/o space, memory space enabled vga0 at pci4 dev 0 function 0: ATI Technologies Radeon 7000/VE QY (rev. 0x00) wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0 wsmux1: connecting to wsdisplay0 ppb4 at pci0 dev 6 function 0: Acer Labs M5249 Hypertransport to PCI bridge (rev. 0x00) pci5 at ppb4 bus 5 pci5: i/o space, memory space enabled rtk0 at pci5 dev 5 function 0: D-Link Systems DFE 530TX+ (rev. 0x10) rtk0: interrupting at ioapic0 pin 20 (irq 11) rtk0: Ethernet address 00:50:ba:60:0e:19 rlphy0 at rtk0 phy 7: Realtek internal PHY rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto skc0 at pci5 dev 6 function 0: ioapic0 pin 21 (irq 4) skc0: interrupt moderation is 0 us skc0: DGE-530T Gigabit Ethernet Adapter rev. (0x9) sk0 at skc0 port A: Ethernet address 00:15:e9:bd:0c:1e makphy0 at sk0 phy 0: Marvell 88E1011 Gigabit PHY, rev. 5 makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto pcib0 at pci0 dev 7 function 0 pcib0: Acer Labs M1563 PCI-ISA Bridge (rev. 0x70) Acer Labs M7101 Power Management Controller (miscellaneous bridge) at pci0 dev 7 function 1 not configured auacer0 at pci0 dev 8 function 0: Acer Labs M5455 Audio controller auacer0: interrupting at ioapic0 pin 18 (irq 7) auacer0: ac97: Avance Logic ALC850 codec; no 3D stereo auacer0: ac97: ext id 9c6 audio0 at auacer0: full duplex, independent Acer Labs product 0x5263 (ethernet network, revision 0x40) at pci0 dev 17 function 0 not configured aceride0 at pci0 dev 18 function 0 aceride0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc7) aceride0: bus-master DMA support present aceride0: primary channel configured to compatibility mode aceride0: primary channel interrupting at ioapic0 pin 14 (irq 14) atabus0 at aceride0 channel 0 aceride0: secondary channel configured to compatibility mode aceride0: secondary channel interrupting at ioapic0 pin 15 (irq 15) atabus1 at aceride0 channel 1 pciide0 at pci0 dev 18 function 1 pciide0: Acer Labs product 0x5289 (rev. 0x10) pciide0: bus-master DMA support present, but unused (no driver support) pciide0: primary channel configured to native-PCI mode pciide0: using ioapic0 pin 19 (irq 5) for native-PCI interrupt atabus2 at pciide0 channel 0 pciide0: secondary channel configured to native-PCI mode atabus3 at pciide0 channel 1 ohci0 at pci0 dev 19 function 0: Acer Labs M5237 USB 1.1 Host Controller (rev. 0x03) ohci0: interrupting at ioapic0 pin 20 (irq 11) ohci0: OHCI version 1.0, legacy support usb0 at ohci0: USB revision 1.0 uhub0 at usb0 uhub0: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered ohci1 at pci0 dev 19 function 1: Acer Labs M5237 USB 1.1 Host Controller (rev. 0x03) ohci1: interrupting at ioapic0 pin 21 (irq 4) ohci1: OHCI version 1.0, legacy support usb1 at ohci1: USB revision 1.0 uhub1 at usb1 uhub1: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 3 ports with 3 removable, self powered ohci2 at pci0 dev 19 function 2: Acer Labs M5237 USB 1.1 Host Controller (rev. 0x03) ohci2: interrupting at ioapic0 pin 22 (irq 11) ohci2: OHCI version 1.0, legacy support usb2 at ohci2: USB revision 1.0 uhub2 at usb2 uhub2: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 3 ports with 3 removable, self powered ehci0 at pci0 dev 19 function 3: Acer Labs M5239 USB 2.0 Host Controller (rev. 0x01) ehci0: interrupting at ioapic0 pin 23 (irq 5) ehci0: BIOS has given up ownership ehci0: EHCI version 1.0 ehci0: companion controllers, 3 ports each: ohci0 ohci1 ohci2 usb3 at ehci0: USB revision 2.0 uhub3 at usb3 uhub3: Acer Labs EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub3: 8 ports with 8 removable, self powered pchb2 at pci0 dev 24 function 0 pchb2: Advanced Micro Devices AMD64 HyperTransport configuration (rev. 0x00) pchb3 at pci0 dev 24 function 1 pchb3: Advanced Micro Devices AMD64 Address Map configuration (rev. 0x00) pchb4 at pci0 dev 24 function 2 pchb4: Advanced Micro Devices AMD64 DRAM configuration (rev. 0x00) pchb5 at pci0 dev 24 function 3 pchb5: Advanced Micro Devices AMD64 Miscellaneous configuration (rev. 0x00) isa0 at pcib0 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 fd0 at fdc1 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec wd0 at atabus0 drive 0: wd0: drive supports 32-sector PIO transfers, LBA addressing wd0: 19536 MB, 39693 cyl, 16 head, 63 sec, 512 bytes/sect x 40011300 sectors wd0: 32-bit data port wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66) wd1 at atabus0 drive 1: wd1: drive supports 16-sector PIO transfers, LBA addressing wd1: 76345 MB, 155114 cyl, 16 head, 63 sec, 512 bytes/sect x 156355584 sectors wd1: 32-bit data port wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) wd0(aceride0:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA) wd1(aceride0:0:1): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA) atapibus0 at atabus1: 2 targets cd0 at atapibus0 drive 0: cdrom removable cd0: 32-bit data port cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33) cd0(aceride0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA) uhub4 at uhub3 port 3 uhub4: Standard Microsystems product 0xa700, class 9/0, rev 2.00/0.00, addr 2 uhub4: multiple transaction translators uhub4: 4 ports with 4 removable, self powered uhub4: device problem, disabling port 2 uscanner0 at uhub4 port 4 uscanner0: Hewlett Packard HP ScanJet 5200C, rev 1.00/1.00, addr 3 boot device: wd1 root on wd1a dumps on wd0b ulpt0 at uhub1 port 2 configuration 1 interface 0 ulpt0: HewLett Packard HP LaserJet 1200, rev 1.10/1.00, addr 2, iclass 7/1 ulpt0: using bi-directional mode skc0: interrupt moderation is 1000 us wsdisplay0: screen 1 added (80x25, vt100 emulation) wsdisplay0: screen 2 added (80x25, vt100 emulation) wsdisplay0: screen 3 added (80x25, vt100 emulation) wsdisplay0: screen 4 added (80x25, vt100 emulation) wsdisplay0: screen 5 added (80x25, vt100 emulation) wsdisplay0: screen 6 added (80x25, vt100 emulation) wsdisplay0: screen 7 added (80x25, vt100 emulation) uhidev0 at uhub4 port 3 configuration 1 interface 0 uhidev0: Primax Electronics product 0x4d09, rev 1.00/0.10, addr 4, iclass 3/1 ums0 at uhidev0: 5 buttons and Z dir. wsmouse1 at ums0 mux 0 uhidev0: bad input length 4 != 0 syncing disks... 5 3 done unmounting file systems...Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 4.99.16 (CAPO64) #6: Fri Mar 30 05:28:12 EDT 2007 gary@capo:/usr/obj/sys/arch/amd64/compile.amd64/CAPO64 total memory = 2047 MB avail memory = 1967 MB sysctl_createv: sysctl_create(machine) returned 17 timecounter: Timecounters tick every 10.000 msec timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 mainbus0 (root) cpu0 at mainbus0 apid 0: (boot processor) cpu0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+, 2000.16 MHz cpu0: features: f7dbfbff cpu0: features: f7dbfbff cpu0: features: f7dbfbff cpu0: features2: 1 cpu0: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way cpu0: L2 cache 512 KB 64B/line 16-way cpu0: ITLB 32 4 KB entries fully associative, 8 4 MB entries fully associative cpu0: DTLB 32 4 KB entries fully associative, 8 4 MB entries fully associative cpu0: AMD Power Management features: f cpu0: AMD Cool`n'Quiet Technology 2000 MHz cpu0: available frequencies (Mhz): 1000 1800 2000 cpu0: calibrating local timer cpu0: apic clock running at 200 MHz cpu0: 8 page colors cpu1 at mainbus0 apid 1: (application processor) cpu1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+, 2000.07 MHz cpu1: features: f7dbfbff cpu1: features: f7dbfbff cpu1: features: f7dbfbff cpu1: features2: 1 cpu1: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way cpu1: L2 cache 512 KB 64B/line 16-way cpu1: ITLB 32 4 KB entries fully associative, 8 4 MB entries fully associative cpu1: DTLB 32 4 KB entries fully associative, 8 4 MB entries fully associative cpu1: AMD Power Management features: f ioapic0 at mainbus0 apid 2 ioapic0: pa 0xfec00000, version 11, 24 pins ioapic1 at mainbus0 apid 3 ioapic1: pa 0xfec10000, version 11, 16 pins acpi0 at mainbus0: Advanced Configuration and Power Interface acpi0: using Intel ACPI CA subsystem version 20060217 acpi0: X/RSDT: OemId , AslId acpi0: SCI interrupting at int 9 acpi0: fixed-feature power button present timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000 ACPI-Fast 32-bit timer ACPI Object Type 'Processor' (0x0c) at acpi0 not configured ACPI Object Type 'Processor' (0x0c) at acpi0 not configured PNP0A03 [PCI/PCI-X Host Bridge] at acpi0 not configured PNP0000 [AT Interrupt Controller] at acpi0 not configured PNP0200 [AT DMA Controller] at acpi0 not configured attimer0 at acpi0 (PNP0100): AT Timer attimer0: io 0x40-0x43 irq 0 PNP0B00 [AT Real-Time Clock] at acpi0 not configured pcppi0 at acpi0 (PNP0800) pcppi0: io 0x61 midi0 at pcppi0: PC speaker (CPU-intensive output) sysbeep0 at pcppi0 PNP0C04 [Math Coprocessor] at acpi0 not configured fdc1 at acpi0 (PNP0700) fdc1: io 0x3f0-0x3f5,0x3f7 irq 6 drq 2 fdc1: expected BUFFER, got 4 PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured pckbc0 at acpi0 (PNP0303): kbd port pckbc0: io 0x60,0x64 irq 1 pckbc1 at acpi0 (PNP0F03): aux port pckbc1: irq 12 PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured PNP0C01 [System Board] at acpi0 not configured acpibut0 at acpi0 (PNP0C0C-170): ACPI Power Button PNP0C0F [PCI interrupt link device] at acpi0 not configured PNP0C0F [PCI interrupt link device] at acpi0 not configured PNP0C0F [PCI interrupt link device] at acpi0 not configured PNP0C0F [PCI interrupt link device] at acpi0 not configured PNP0C0F [PCI interrupt link device] at acpi0 not configured PNP0C0F [PCI interrupt link device] at acpi0 not configured PNP0C0F [PCI interrupt link device] at acpi0 not configured PNP0C0F [PCI interrupt link device] at acpi0 not configured PNP0C0F [PCI interrupt link device] at acpi0 not configured pcppi0: attached to attimer0 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok pchb0 at pci0 dev 0 function 0 pchb0: Acer Labs product 0x1695 (rev. 0x00) ppb0 at pci0 dev 1 function 0: Acer Labs product 0x524b (rev. 0x00) pci1 at ppb0 bus 1 pci1: memory space enabled, rd/line, wr/inv ok ppb1 at pci0 dev 2 function 0: Acer Labs product 0x524c (rev. 0x00) pci2 at ppb1 bus 2 pci2: memory space enabled, rd/line, wr/inv ok ppb2 at pci0 dev 3 function 0: Acer Labs product 0x524d (rev. 0x00) pci3 at ppb2 bus 3 pci3: i/o space, memory space enabled, rd/line, wr/inv ok unknown vendor 0x197b product 0x2360 (SATA mass storage, interface 0x01, revision 0x02) at pci3 dev 0 function 0 not configured pchb1 at pci0 dev 4 function 0 pchb1: Acer Labs product 0x1689 (rev. 0x00) agp at pchb1 not configured ppb3 at pci0 dev 5 function 0: Acer Labs product 0x5246 (rev. 0x00) pci4 at ppb3 bus 4 pci4: i/o space, memory space enabled vga0 at pci4 dev 0 function 0: ATI Technologies Radeon 7000/VE QY (rev. 0x00) wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0 wsmux1: connecting to wsdisplay0 direct rendering for vga0 unsupported ppb4 at pci0 dev 6 function 0: Acer Labs M5249 Hypertransport to PCI bridge (rev. 0x00) pci5 at ppb4 bus 5 pci5: i/o space, memory space enabled rtk0 at pci5 dev 5 function 0: D-Link Systems DFE 530TX+ (rev. 0x10) rtk0: interrupting at ioapic0 pin 20 (irq 11) rtk0: Ethernet address 00:50:ba:60:0e:19 rlphy0 at rtk0 phy 7: Realtek internal PHY rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto skc0 at pci5 dev 6 function 0: ioapic0 pin 21 (irq 4) skc0: interrupt moderation is 0 us skc0: DGE-530T Gigabit Ethernet Adapter rev. (0x9) sk0 at skc0 port A: Ethernet address 00:15:e9:bd:0c:1e makphy0 at sk0 phy 0: Marvell 88E1011 Gigabit PHY, rev. 5 makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto pcib0 at pci0 dev 7 function 0 pcib0: Acer Labs M1563 PCI-ISA Bridge (rev. 0x70) Acer Labs M7101 Power Management Controller (miscellaneous bridge) at pci0 dev 7 function 1 not configured auacer0 at pci0 dev 8 function 0: Acer Labs M5455 Audio controller auacer0: interrupting at ioapic0 pin 18 (irq 7) auacer0: ac97: Avance Logic ALC850 codec; no 3D stereo auacer0: ac97: ext id 9c6 audio0 at auacer0: full duplex, independent Acer Labs product 0x5263 (ethernet network, revision 0x40) at pci0 dev 17 function 0 not configured aceride0 at pci0 dev 18 function 0 aceride0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc7) aceride0: bus-master DMA support present aceride0: primary channel configured to compatibility mode aceride0: primary channel interrupting at ioapic0 pin 14 (irq 14) atabus0 at aceride0 channel 0 aceride0: secondary channel configured to compatibility mode aceride0: secondary channel interrupting at ioapic0 pin 15 (irq 15) atabus1 at aceride0 channel 1 pciide0 at pci0 dev 18 function 1 pciide0: Acer Labs product 0x5289 (rev. 0x10) pciide0: bus-master DMA support present, but unused (no driver support) pciide0: primary channel configured to native-PCI mode pciide0: using ioapic0 pin 19 (irq 5) for native-PCI interrupt atabus2 at pciide0 channel 0 pciide0: secondary channel configured to native-PCI mode atabus3 at pciide0 channel 1 ohci0 at pci0 dev 19 function 0: Acer Labs M5237 USB 1.1 Host Controller (rev. 0x03) ohci0: interrupting at ioapic0 pin 20 (irq 11) ohci0: OHCI version 1.0, legacy support usb0 at ohci0: USB revision 1.0 uhub0 at usb0 uhub0: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered ohci1 at pci0 dev 19 function 1: Acer Labs M5237 USB 1.1 Host Controller (rev. 0x03) ohci1: interrupting at ioapic0 pin 21 (irq 4) ohci1: OHCI version 1.0, legacy support usb1 at ohci1: USB revision 1.0 uhub1 at usb1 uhub1: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 3 ports with 3 removable, self powered ohci2 at pci0 dev 19 function 2: Acer Labs M5237 USB 1.1 Host Controller (rev. 0x03) ohci2: interrupting at ioapic0 pin 22 (irq 11) ohci2: OHCI version 1.0, legacy support usb2 at ohci2: USB revision 1.0 uhub2 at usb2 uhub2: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 3 ports with 3 removable, self powered ehci0 at pci0 dev 19 function 3: Acer Labs M5239 USB 2.0 Host Controller (rev. 0x01) ehci0: interrupting at ioapic0 pin 23 (irq 5) ehci0: BIOS has given up ownership ehci0: EHCI version 1.0 ehci0: companion controllers, 3 ports each: ohci0 ohci1 ohci2 usb3 at ehci0: USB revision 2.0 uhub3 at usb3 uhub3: Acer Labs EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub3: 8 ports with 8 removable, self powered pchb2 at pci0 dev 24 function 0 pchb2: Advanced Micro Devices AMD64 HyperTransport configuration (rev. 0x00) pchb3 at pci0 dev 24 function 1 pchb3: Advanced Micro Devices AMD64 Address Map configuration (rev. 0x00) pchb4 at pci0 dev 24 function 2 pchb4: Advanced Micro Devices AMD64 DRAM configuration (rev. 0x00) pchb5 at pci0 dev 24 function 3 pchb5: Advanced Micro Devices AMD64 Miscellaneous configuration (rev. 0x00) isa0 at pcib0 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 fd0 at fdc1 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec wd0 at atabus0 drive 0: wd0: drive supports 32-sector PIO transfers, LBA addressing wd0: 19536 MB, 39693 cyl, 16 head, 63 sec, 512 bytes/sect x 40011300 sectors wd0: 32-bit data port wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66) wd1 at atabus0 drive 1: wd1: drive supports 16-sector PIO transfers, LBA addressing wd1: 76345 MB, 155114 cyl, 16 head, 63 sec, 512 bytes/sect x 156355584 sectors wd1: 32-bit data port wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) wd0(aceride0:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA) wd1(aceride0:0:1): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA) atapibus0 at atabus1: 2 targets cd0 at atapibus0 drive 0: cdrom removable cd0: 32-bit data port cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33) cd0(aceride0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA) uhub4 at uhub3 port 3 uhub4: Standard Microsystems product 0xa700, class 9/0, rev 2.00/0.00, addr 2 uhub4: multiple transaction translators uhub4: 4 ports with 4 removable, self powered uhub4: device problem, disabling port 3 uscanner0 at uhub4 port 4 uscanner0: Hewlett Packard Scanjet 5200C, rev 1.00/1.00, addr 3 uhidev0 at uhub4 port 2 configuration 1 interface 0 uhidev0: Primax Electronics product 0x4d09, rev 1.00/0.10, addr 4, iclass 3/1 ums0 at uhidev0: 5 buttons and Z dir. wsmouse1 at ums0 mux 0 boot device: wd1 root on wd1a dumps on wd0b ulpt0 at uhub1 port 2 configuration 1 interface 0 ulpt0: HewLett Packard HP LaserJet 1200, rev 1.10/1.00, addr 2, iclass 7/1 ulpt0: using bi-directional mode skc0: interrupt moderation is 1000 us wsdisplay0: screen 1 added (80x25, vt100 emulation) wsdisplay0: screen 2 added (80x25, vt100 emulation) wsdisplay0: screen 3 added (80x25, vt100 emulation) wsdisplay0: screen 4 added (80x25, vt100 emulation) wsdisplay0: screen 5 added (80x25, vt100 emulation) wsdisplay0: screen 6 added (80x25, vt100 emulation) wsdisplay0: screen 7 added (80x25, vt100 emulation) uhidev0: bad input length 4 != 0 Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 4.99.16 (CAPO64) #6: Fri Mar 30 05:28:12 EDT 2007 gary@capo:/usr/obj/sys/arch/amd64/compile.amd64/CAPO64 total memory = 2047 MB avail memory = 1967 MB sysctl_createv: sysctl_create(machine) returned 17 timecounter: Timecounters tick every 10.000 msec timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 mainbus0 (root) cpu0 at mainbus0 apid 0: (boot processor) cpu0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+, 2000.15 MHz cpu0: features: f7dbfbff cpu0: features: f7dbfbff cpu0: features: f7dbfbff cpu0: features2: 1 cpu0: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way cpu0: L2 cache 512 KB 64B/line 16-way cpu0: ITLB 32 4 KB entries fully associative, 8 4 MB entries fully associative cpu0: DTLB 32 4 KB entries fully associative, 8 4 MB entries fully associative cpu0: AMD Power Management features: f cpu0: AMD Cool`n'Quiet Technology 2000 MHz cpu0: available frequencies (Mhz): 1000 1800 2000 cpu0: calibrating local timer cpu0: apic clock running at 200 MHz cpu0: 8 page colors cpu1 at mainbus0 apid 1: (application processor) cpu1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+, 2000.07 MHz cpu1: features: f7dbfbff cpu1: features: f7dbfbff cpu1: features: f7dbfbff cpu1: features2: 1 cpu1: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way cpu1: L2 cache 512 KB 64B/line 16-way cpu1: ITLB 32 4 KB entries fully associative, 8 4 MB entries fully associative cpu1: DTLB 32 4 KB entries fully associative, 8 4 MB entries fully associative cpu1: AMD Power Management features: f ioapic0 at mainbus0 apid 2 ioapic0: pa 0xfec00000, version 11, 24 pins ioapic1 at mainbus0 apid 3 ioapic1: pa 0xfec10000, version 11, 16 pins acpi0 at mainbus0: Advanced Configuration and Power Interface acpi0: using Intel ACPI CA subsystem version 20060217 acpi0: X/RSDT: OemId , AslId acpi0: SCI interrupting at int 9 acpi0: fixed-feature power button present timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000 ACPI-Fast 32-bit timer ACPI Object Type 'Processor' (0x0c) at acpi0 not configured ACPI Object Type 'Processor' (0x0c) at acpi0 not configured PNP0A03 [PCI/PCI-X Host Bridge] at acpi0 not configured PNP0000 [AT Interrupt Controller] at acpi0 not configured PNP0200 [AT DMA Controller] at acpi0 not configured attimer0 at acpi0 (PNP0100): AT Timer attimer0: io 0x40-0x43 irq 0 PNP0B00 [AT Real-Time Clock] at acpi0 not configured pcppi0 at acpi0 (PNP0800) pcppi0: io 0x61 midi0 at pcppi0: PC speaker (CPU-intensive output) sysbeep0 at pcppi0 PNP0C04 [Math Coprocessor] at acpi0 not configured fdc1 at acpi0 (PNP0700) fdc1: io 0x3f0-0x3f5,0x3f7 irq 6 drq 2 fdc1: expected BUFFER, got 4 PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured pckbc0 at acpi0 (PNP0303): kbd port pckbc0: io 0x60,0x64 irq 1 pckbc1 at acpi0 (PNP0F03): aux port pckbc1: irq 12 PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured PNP0C01 [System Board] at acpi0 not configured acpibut0 at acpi0 (PNP0C0C-170): ACPI Power Button PNP0C0F [PCI interrupt link device] at acpi0 not configured PNP0C0F [PCI interrupt link device] at acpi0 not configured PNP0C0F [PCI interrupt link device] at acpi0 not configured PNP0C0F [PCI interrupt link device] at acpi0 not configured PNP0C0F [PCI interrupt link device] at acpi0 not configured PNP0C0F [PCI interrupt link device] at acpi0 not configured PNP0C0F [PCI interrupt link device] at acpi0 not configured PNP0C0F [PCI interrupt link device] at acpi0 not configured PNP0C0F [PCI interrupt link device] at acpi0 not configured pcppi0: attached to attimer0 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok pchb0 at pci0 dev 0 function 0 pchb0: Acer Labs product 0x1695 (rev. 0x00) ppb0 at pci0 dev 1 function 0: Acer Labs product 0x524b (rev. 0x00) pci1 at ppb0 bus 1 pci1: memory space enabled, rd/line, wr/inv ok ppb1 at pci0 dev 2 function 0: Acer Labs product 0x524c (rev. 0x00) pci2 at ppb1 bus 2 pci2: memory space enabled, rd/line, wr/inv ok ppb2 at pci0 dev 3 function 0: Acer Labs product 0x524d (rev. 0x00) pci3 at ppb2 bus 3 pci3: i/o space, memory space enabled, rd/line, wr/inv ok unknown vendor 0x197b product 0x2360 (SATA mass storage, interface 0x01, revision 0x02) at pci3 dev 0 function 0 not configured pchb1 at pci0 dev 4 function 0 pchb1: Acer Labs product 0x1689 (rev. 0x00) agp at pchb1 not configured ppb3 at pci0 dev 5 function 0: Acer Labs product 0x5246 (rev. 0x00) pci4 at ppb3 bus 4 pci4: i/o space, memory space enabled vga0 at pci4 dev 0 function 0: ATI Technologies Radeon 7000/VE QY (rev. 0x00) wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0 wsmux1: connecting to wsdisplay0 direct rendering for vga0 unsupported ppb4 at pci0 dev 6 function 0: Acer Labs M5249 Hypertransport to PCI bridge (rev. 0x00) pci5 at ppb4 bus 5 pci5: i/o space, memory space enabled rtk0 at pci5 dev 5 function 0: D-Link Systems DFE 530TX+ (rev. 0x10) rtk0: interrupting at ioapic0 pin 20 (irq 11) rtk0: Ethernet address 00:50:ba:60:0e:19 rlphy0 at rtk0 phy 7: Realtek internal PHY rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto skc0 at pci5 dev 6 function 0: ioapic0 pin 21 (irq 4) skc0: interrupt moderation is 0 us skc0: DGE-530T Gigabit Ethernet Adapter rev. (0x9) sk0 at skc0 port A: Ethernet address 00:15:e9:bd:0c:1e makphy0 at sk0 phy 0: Marvell 88E1011 Gigabit PHY, rev. 5 makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto pcib0 at pci0 dev 7 function 0 pcib0: Acer Labs M1563 PCI-ISA Bridge (rev. 0x70) Acer Labs M7101 Power Management Controller (miscellaneous bridge) at pci0 dev 7 function 1 not configured auacer0 at pci0 dev 8 function 0: Acer Labs M5455 Audio controller auacer0: interrupting at ioapic0 pin 18 (irq 7) auacer0: ac97: Avance Logic ALC850 codec; no 3D stereo auacer0: ac97: ext id 9c6 audio0 at auacer0: full duplex, independent Acer Labs product 0x5263 (ethernet network, revision 0x40) at pci0 dev 17 function 0 not configured aceride0 at pci0 dev 18 function 0 aceride0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc7) aceride0: bus-master DMA support present aceride0: primary channel configured to compatibility mode aceride0: primary channel interrupting at ioapic0 pin 14 (irq 14) atabus0 at aceride0 channel 0 aceride0: secondary channel configured to compatibility mode aceride0: secondary channel interrupting at ioapic0 pin 15 (irq 15) atabus1 at aceride0 channel 1 pciide0 at pci0 dev 18 function 1 pciide0: Acer Labs product 0x5289 (rev. 0x10) pciide0: bus-master DMA support present, but unused (no driver support) pciide0: primary channel configured to native-PCI mode pciide0: using ioapic0 pin 19 (irq 5) for native-PCI interrupt atabus2 at pciide0 channel 0 pciide0: secondary channel configured to native-PCI mode atabus3 at pciide0 channel 1 ohci0 at pci0 dev 19 function 0: Acer Labs M5237 USB 1.1 Host Controller (rev. 0x03) ohci0: interrupting at ioapic0 pin 20 (irq 11) ohci0: OHCI version 1.0, legacy support usb0 at ohci0: USB revision 1.0 uhub0 at usb0 uhub0: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered ohci1 at pci0 dev 19 function 1: Acer Labs M5237 USB 1.1 Host Controller (rev. 0x03) ohci1: interrupting at ioapic0 pin 21 (irq 4) ohci1: OHCI version 1.0, legacy support usb1 at ohci1: USB revision 1.0 uhub1 at usb1 uhub1: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 3 ports with 3 removable, self powered ohci2 at pci0 dev 19 function 2: Acer Labs M5237 USB 1.1 Host Controller (rev. 0x03) ohci2: interrupting at ioapic0 pin 22 (irq 11) ohci2: OHCI version 1.0, legacy support usb2 at ohci2: USB revision 1.0 uhub2 at usb2 uhub2: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 3 ports with 3 removable, self powered ehci0 at pci0 dev 19 function 3: Acer Labs M5239 USB 2.0 Host Controller (rev. 0x01) ehci0: interrupting at ioapic0 pin 23 (irq 5) ehci0: BIOS has given up ownership ehci0: EHCI version 1.0 ehci0: companion controllers, 3 ports each: ohci0 ohci1 ohci2 usb3 at ehci0: USB revision 2.0 uhub3 at usb3 uhub3: Acer Labs EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub3: 8 ports with 8 removable, self powered pchb2 at pci0 dev 24 function 0 pchb2: Advanced Micro Devices AMD64 HyperTransport configuration (rev. 0x00) pchb3 at pci0 dev 24 function 1 pchb3: Advanced Micro Devices AMD64 Address Map configuration (rev. 0x00) pchb4 at pci0 dev 24 function 2 pchb4: Advanced Micro Devices AMD64 DRAM configuration (rev. 0x00) pchb5 at pci0 dev 24 function 3 pchb5: Advanced Micro Devices AMD64 Miscellaneous configuration (rev. 0x00) isa0 at pcib0 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 fd0 at fdc1 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec wd0 at atabus0 drive 0: wd0: drive supports 32-sector PIO transfers, LBA addressing wd0: 19536 MB, 39693 cyl, 16 head, 63 sec, 512 bytes/sect x 40011300 sectors wd0: 32-bit data port wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66) wd1 at atabus0 drive 1: wd1: drive supports 16-sector PIO transfers, LBA addressing wd1: 76345 MB, 155114 cyl, 16 head, 63 sec, 512 bytes/sect x 156355584 sectors wd1: 32-bit data port wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) wd0(aceride0:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA) wd1(aceride0:0:1): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA) atapibus0 at atabus1: 2 targets cd0 at atapibus0 drive 0: cdrom removable cd0: 32-bit data port cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33) cd0(aceride0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA) uhub4 at uhub3 port 3 uhub4: Standard Microsystems product 0xa700, class 9/0, rev 2.00/0.00, addr 2 uhub4: multiple transaction translators uhub4: 4 ports with 4 removable, self powered uhub4: device problem, disabling port 2 uscanner0 at uhub4 port 4 uscanner0: Hewlett Packard Scanjet 5200C, rev 1.00/1.00, addr 3 uhub4: device problem, disabling port 3 boot device: wd1 root on wd1a dumps on wd0b ulpt0 at uhub1 port 2 configuration 1 interface 0 ulpt0: HewLett Packard HP LaserJet 1200, rev 1.10/1.00, addr 2, iclass 7/1 ulpt0: using bi-directional mode uhidev0 at uhub4 port 3 configuration 1 interface 0 uhidev0: Primax Electronics product 0x4d09, rev 1.00/0.10, addr 4, iclass 3/1 ums0 at uhidev0: 5 buttons and Z dir. wsmouse1 at ums0 mux 0 skc0: interrupt moderation is 1000 us wsdisplay0: screen 1 added (80x25, vt100 emulation) wsdisplay0: screen 2 added (80x25, vt100 emulation) wsdisplay0: screen 3 added (80x25, vt100 emulation) wsdisplay0: screen 4 added (80x25, vt100 emulation) wsdisplay0: screen 5 added (80x25, vt100 emulation) wsdisplay0: screen 6 added (80x25, vt100 emulation) wsdisplay0: screen 7 added (80x25, vt100 emulation) uhidev0: bad input length 4 != 0 uvm_fault(0xffffffff805ebb00, 0xffffffff85142000, 1) -> e uvm_fault(0xffffffff805ebb00, 0xffffffff85142000, 1) -> e uvm_fault(0xffffffff805ebb00, 0xffffffff85142000, 1) -> e syncing disks... done unmounting file systems...Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 4.99.13 (CAPO64) #3: Tue Mar 6 08:43:08 EST 2007 gary@capo:/usr/obj/sys/arch/amd64/compile.amd64/CAPO64 total memory = 2047 MB avail memory = 1967 MB timecounter: Timecounters tick every 10.000 msec timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 mainbus0 (root) cpu0 at mainbus0 apid 0: (boot processor) cpu0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+, 2000.11 MHz cpu0: features: f7dbfbff cpu0: features: f7dbfbff cpu0: features: f7dbfbff cpu0: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way cpu0: L2 cache 512 KB 64B/line 16-way cpu0: ITLB 32 4 KB entries fully associative, 8 4 MB entries fully associative cpu0: DTLB 32 4 KB entries fully associative, 8 4 MB entries fully associative cpu0: AMD Power Management features: f cpu0: AMD Cool`n'Quiet Technology 2000 MHz cpu0: available frequencies (Mhz): 1000 1800 2000 cpu0: calibrating local timer cpu0: apic clock running at 200 MHz cpu0: 8 page colors cpu1 at mainbus0 apid 1: (application processor) cpu1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+, 2000.07 MHz cpu1: features: f7dbfbff cpu1: features: f7dbfbff cpu1: features: f7dbfbff cpu1: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way cpu1: L2 cache 512 KB 64B/line 16-way cpu1: ITLB 32 4 KB entries fully associative, 8 4 MB entries fully associative cpu1: DTLB 32 4 KB entries fully associative, 8 4 MB entries fully associative cpu1: AMD Power Management features: f cpu0: AMD Cool`n'Quiet Technology 2000 MHz cpu0: available frequencies (Mhz): 1000 1800 2000 ioapic0 at mainbus0 apid 2 ioapic0: pa 0xfec00000, version 11, 24 pins ioapic1 at mainbus0 apid 3 ioapic1: pa 0xfec10000, version 11, 16 pins acpi0 at mainbus0: Advanced Configuration and Power Interface acpi0: using Intel ACPI CA subsystem version 20060217 acpi0: X/RSDT: OemId , AslId acpi0: SCI interrupting at int 9 acpi0: fixed-feature power button present timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000 ACPI-Fast 32-bit timer ACPI Object Type 'Processor' (0x0c) at acpi0 not configured ACPI Object Type 'Processor' (0x0c) at acpi0 not configured PNP0A03 [PCI/PCI-X Host Bridge] at acpi0 not configured PNP0000 [AT Interrupt Controller] at acpi0 not configured PNP0200 [AT DMA Controller] at acpi0 not configured attimer0 at acpi0 (PNP0100): AT Timer attimer0: io 0x40-0x43 irq 0 PNP0B00 [AT Real-Time Clock] at acpi0 not configured pcppi0 at acpi0 (PNP0800) pcppi0: io 0x61 midi0 at pcppi0: PC speaker (CPU-intensive output) sysbeep0 at pcppi0 PNP0C04 [Math Coprocessor] at acpi0 not configured fdc1 at acpi0 (PNP0700) fdc1: io 0x3f0-0x3f5,0x3f7 irq 6 drq 2 fdc1: expected BUFFER, got 4 PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured pckbc0 at acpi0 (PNP0303): kbd port pckbc0: io 0x60,0x64 irq 1 pckbc1 at acpi0 (PNP0F03): aux port pckbc1: irq 12 PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured PNP0C01 [System Board] at acpi0 not configured acpibut0 at acpi0 (PNP0C0C-170): ACPI Power Button PNP0C0F [PCI interrupt link device] at acpi0 not configured PNP0C0F [PCI interrupt link device] at acpi0 not configured PNP0C0F [PCI interrupt link device] at acpi0 not configured PNP0C0F [PCI interrupt link device] at acpi0 not configured PNP0C0F [PCI interrupt link device] at acpi0 not configured PNP0C0F [PCI interrupt link device] at acpi0 not configured PNP0C0F [PCI interrupt link device] at acpi0 not configured PNP0C0F [PCI interrupt link device] at acpi0 not configured PNP0C0F [PCI interrupt link device] at acpi0 not configured pcppi0: attached to attimer0 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok pchb0 at pci0 dev 0 function 0 pchb0: Acer Labs product 0x1695 (rev. 0x00) ppb0 at pci0 dev 1 function 0: Acer Labs product 0x524b (rev. 0x00) pci1 at ppb0 bus 1 pci1: memory space enabled, rd/line, wr/inv ok ppb1 at pci0 dev 2 function 0: Acer Labs product 0x524c (rev. 0x00) pci2 at ppb1 bus 2 pci2: memory space enabled, rd/line, wr/inv ok ppb2 at pci0 dev 3 function 0: Acer Labs product 0x524d (rev. 0x00) pci3 at ppb2 bus 3 pci3: i/o space, memory space enabled, rd/line, wr/inv ok unknown vendor 0x197b product 0x2360 (SATA mass storage, interface 0x01, revision 0x02) at pci3 dev 0 function 0 not configured pchb1 at pci0 dev 4 function 0 pchb1: Acer Labs product 0x1689 (rev. 0x00) agp at pchb1 not configured ppb3 at pci0 dev 5 function 0: Acer Labs product 0x5246 (rev. 0x00) pci4 at ppb3 bus 4 pci4: i/o space, memory space enabled vga0 at pci4 dev 0 function 0: ATI Technologies Radeon 7000/VE QY (rev. 0x00) wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0 wsmux1: connecting to wsdisplay0 ppb4 at pci0 dev 6 function 0: Acer Labs M5249 Hypertransport to PCI bridge (rev. 0x00) pci5 at ppb4 bus 5 pci5: i/o space, memory space enabled rtk0 at pci5 dev 5 function 0: D-Link Systems DFE 530TX+ (rev. 0x10) rtk0: interrupting at ioapic0 pin 20 (irq 11) rtk0: Ethernet address 00:50:ba:60:0e:19 rlphy0 at rtk0 phy 7: Realtek internal PHY rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto skc0 at pci5 dev 6 function 0: ioapic0 pin 21 (irq 4) skc0: interrupt moderation is 0 us skc0: DGE-530T Gigabit Ethernet Adapter rev. (0x9) sk0 at skc0 port A: Ethernet address 00:15:e9:bd:0c:1e makphy0 at sk0 phy 0: Marvell 88E1011 Gigabit PHY, rev. 5 makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto pcib0 at pci0 dev 7 function 0 pcib0: Acer Labs M1563 PCI-ISA Bridge (rev. 0x70) Acer Labs M7101 Power Management Controller (miscellaneous bridge) at pci0 dev 7 function 1 not configured auacer0 at pci0 dev 8 function 0: Acer Labs M5455 Audio controller auacer0: interrupting at ioapic0 pin 18 (irq 7) auacer0: ac97: Avance Logic ALC850 codec; no 3D stereo auacer0: ac97: ext id 9c6 audio0 at auacer0: full duplex, independent Acer Labs product 0x5263 (ethernet network, revision 0x40) at pci0 dev 17 function 0 not configured aceride0 at pci0 dev 18 function 0 aceride0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc7) aceride0: bus-master DMA support present aceride0: primary channel configured to compatibility mode aceride0: primary channel interrupting at ioapic0 pin 14 (irq 14) atabus0 at aceride0 channel 0 aceride0: secondary channel configured to compatibility mode aceride0: secondary channel interrupting at ioapic0 pin 15 (irq 15) atabus1 at aceride0 channel 1 pciide0 at pci0 dev 18 function 1 pciide0: Acer Labs product 0x5289 (rev. 0x10) pciide0: bus-master DMA support present, but unused (no driver support) pciide0: primary channel configured to native-PCI mode pciide0: using ioapic0 pin 19 (irq 5) for native-PCI interrupt atabus2 at pciide0 channel 0 pciide0: secondary channel configured to native-PCI mode atabus3 at pciide0 channel 1 ohci0 at pci0 dev 19 function 0: Acer Labs M5237 USB 1.1 Host Controller (rev. 0x03) ohci0: interrupting at ioapic0 pin 20 (irq 11) ohci0: OHCI version 1.0, legacy support usb0 at ohci0: USB revision 1.0 uhub0 at usb0 uhub0: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered ohci1 at pci0 dev 19 function 1: Acer Labs M5237 USB 1.1 Host Controller (rev. 0x03) ohci1: interrupting at ioapic0 pin 21 (irq 4) ohci1: OHCI version 1.0, legacy support usb1 at ohci1: USB revision 1.0 uhub1 at usb1 uhub1: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 3 ports with 3 removable, self powered ohci2 at pci0 dev 19 function 2: Acer Labs M5237 USB 1.1 Host Controller (rev. 0x03) ohci2: interrupting at ioapic0 pin 22 (irq 11) ohci2: OHCI version 1.0, legacy support usb2 at ohci2: USB revision 1.0 uhub2 at usb2 uhub2: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 3 ports with 3 removable, self powered ehci0 at pci0 dev 19 function 3: Acer Labs M5239 USB 2.0 Host Controller (rev. 0x01) ehci0: interrupting at ioapic0 pin 23 (irq 5) ehci0: BIOS has given up ownership ehci0: EHCI version 1.0 ehci0: companion controllers, 3 ports each: ohci0 ohci1 ohci2 usb3 at ehci0: USB revision 2.0 uhub3 at usb3 uhub3: Acer Labs EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub3: 8 ports with 8 removable, self powered pchb2 at pci0 dev 24 function 0 pchb2: Advanced Micro Devices AMD64 HyperTransport configuration (rev. 0x00) pchb3 at pci0 dev 24 function 1 pchb3: Advanced Micro Devices AMD64 Address Map configuration (rev. 0x00) pchb4 at pci0 dev 24 function 2 pchb4: Advanced Micro Devices AMD64 DRAM configuration (rev. 0x00) pchb5 at pci0 dev 24 function 3 pchb5: Advanced Micro Devices AMD64 Miscellaneous configuration (rev. 0x00) isa0 at pcib0 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 fd0 at fdc1 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec wd0 at atabus0 drive 0: wd0: drive supports 32-sector PIO transfers, LBA addressing wd0: 19536 MB, 39693 cyl, 16 head, 63 sec, 512 bytes/sect x 40011300 sectors wd0: 32-bit data port wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66) wd1 at atabus0 drive 1: wd1: drive supports 16-sector PIO transfers, LBA addressing wd1: 76345 MB, 155114 cyl, 16 head, 63 sec, 512 bytes/sect x 156355584 sectors wd1: 32-bit data port wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) wd0(aceride0:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA) wd1(aceride0:0:1): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA) atapibus0 at atabus1: 2 targets cd0 at atapibus0 drive 0: cdrom removable cd0: 32-bit data port cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33) cd0(aceride0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA) uhub4 at uhub3 port 3 uhub4: Standard Microsystems product 0xa700, class 9/0, rev 2.00/0.00, addr 2 uhub4: multiple transaction translators uhub4: 4 ports with 4 removable, self powered uhidev0 at uhub4 port 3 configuration 1 interface 0 uhidev0: Primax Electronics product 0x4d09, rev 1.00/0.10, addr 3, iclass 3/1 ums0 at uhidev0: 5 buttons and Z dir. wsmouse1 at ums0 mux 0 uhub4: device problem, disabling port 4 boot device: wd1 root on wd1a dumps on wd0b ulpt0 at uhub1 port 2 configuration 1 interface 0 ulpt0: HewLett Packard HP LaserJet 1200, rev 1.10/1.00, addr 2, iclass 7/1 ulpt0: using bi-directional mode skc0: interrupt moderation is 1000 us wsdisplay0: screen 1 added (80x25, vt100 emulation) wsdisplay0: screen 2 added (80x25, vt100 emulation) wsdisplay0: screen 3 added (80x25, vt100 emulation) wsdisplay0: screen 4 added (80x25, vt100 emulation) wsdisplay0: screen 5 added (80x25, vt100 emulation) wsdisplay0: screen 6 added (80x25, vt100 emulation) wsdisplay0: screen 7 added (80x25, vt100 emulation)